Ga door naar hoofdinhoud

Audio-Technica Tone Arm Balancing

Engels
Nederlands
Stap 3
Audio-Technica Tone Arm Balancing: stap 0, afbeelding 1 van 1
  • Engage the tone arm clamp from Step 1.

  • Adjust ONLY the front dial of the counterweight such that the 0 mark is in line with the mark on the tone arm.

  • If the whole counterweight moves this will cause the tonearm to become imbalanced. Go back to Step 2 if this occurs.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.