Ga door naar hoofdinhoud

HP Chromebook Video Cable Replacement

Engels
Nederlands
Stap 3
Geen afbeelding
Display Removal
  • Using a Phillips screwdriver, remove the four screws securing the display to the frame, then lift it away and fold it over to lie face-down upon the keyboard.

  • Peel away any tape securing the video cable to the back of the display, then pull out the connector and set the display aside.

  • It is generally recommended to remove the screws in an "X" formation to equalize pressure on both ends of the screen. This rule also applies to other screwed-in parts.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.