Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 2 vertalen
-
Insert the point of a spudger between the motherboard and the left side of the button board.
-
Use the point of a spudger to push the button board out to separate the adhesive securing it.
-
Grip the board itself with blunt nose tweezers and remove it.
-
If you're reusing your board, the leftover adhesive should be sticky enough to adequately secure it.
-
If your new board comes with pre-installed adhesive, remove any linings and use a spudger to press the board into place.
-
If your board doesn't have adhesive or the leftover adhesive isn't sticky enough, use strips of thin double-sided tape such as Tesa Tape to secure it.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.