Aoson R103 Speakers Replacement

Stap 1 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 1

Aoson R103 Speakers Replacement: stap 0, afbeelding 1 van 2

Aoson R103 Speakers Replacement: stap 0, afbeelding 2 van 2

These are the motherboard connections to the speaker, which will be needed later.
These are the two speakers, which are attached to a plastic piece via a screw.
Remove the 4.0mm long Phillips #00 screw where the plastic disconnects.
Be careful not to dislodge any of the wires behind the plastic piece when taking the plastic off.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.