Ga door naar hoofdinhoud

MacBook Pro 16" 2023 Logic Board and Heatsink Removal

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 24
MacBook Pro 16" 2023 Logic Board and Heatsink Removal, Unfasten the logic board: stap 0, afbeelding 1 van 2 MacBook Pro 16" 2023 Logic Board and Heatsink Removal, Unfasten the logic board: stap 0, afbeelding 2 van 2
Unfasten the logic board
  • Use your T5 Torx driver to remove the ten screws securing the logic board to the frame:

  • Six 3.8 mm screws surrounding the fans

  • Four 4.6 mm screws along the bottom edge

  • Use a 4 mm hex driver to remove the two 6 mm-long standoff screws securing the bottom corners of the logic board to the frame.

  • During reassembly, first thread these bolts in with your fingers, then tighten them with your driver.

  • Use a T6 Torx driver to remove the two 6 mm screws securing the heatsink and logic board to the frame.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.