Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.
Stap 3 vertalen
Stap 3
-
Remove the two screws (M2x4) that secure the USB Type-C port bracket to the system board.
-
Remove the USB Type-C port bracket from the system board.
-
Open the latch, and disconnect the display cable from the system board.
-
Disconnect the Alienhead LED cable from the system board.
-
Peel the display cable from the system board.
-
Disconnect the power-adapter port cable from the system board.
-
Peel the power-adapter port cable from the system board.
-
Disconnect the I/O-board cable from the system board.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.