Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
Remove Service Panel Screws
-
Make sure Pro Data is disconnected from power and Thunderbolt, then set it upside down on an anti-static mat or flat surface with appropriate protection from electrostatic discharge, such as an anti-static wrist strap.
-
Using a #2 Phillips screwdriver, remove the two screws securing the service panel into place.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.