Ga door naar hoofdinhoud

iPad 7 Glass Digitizer Replacement

Engels
Nederlands
Stap 7
iPad 7 Glass Digitizer Replacement: stap 0, afbeelding 1 van 3 iPad 7 Glass Digitizer Replacement: stap 0, afbeelding 2 van 3 iPad 7 Glass Digitizer Replacement: stap 0, afbeelding 3 van 3
  • Disconnect the LCD ribbon cable.

  • Disconnect the digitizer's two ribbon cable connections.

  • Swing open the lock which holds the home button ribbon cable in place.

  • Disconnect the home button ribbon cable with the flat end of a plastic spudger, or gently slide it out of the connection port with tweezers.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.