iPad 7 Glass Digitizer Replacement

Vorige stap Volgende stap

Stap 2 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 2

iPad 7 Glass Digitizer Replacement: stap 0, afbeelding 1 van 3

iPad 7 Glass Digitizer Replacement: stap 0, afbeelding 2 van 3

iPad 7 Glass Digitizer Replacement: stap 0, afbeelding 3 van 3

Pry around the screen's edges as shown. Be careful of parts at the bottom, and under the screen, such as the home button, Wifi attachments, and GPS antennas.
The screen is connected by a ribbon cable about 1/3 of the way up the right edge. Take particular care at that point.
Depending on the nature of the crack in the screen it is likely that the screen will form glass shards. Be careful with your hands and wear gloves if possible.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.