Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
-
Place the projector on its back (buttons down) with the lens facing away from you.
-
Remove the two 84mm screws in the upper left and right corners of the projector using the Phillips #2 screwdriver.
-
Remove the remaining three 8.5mm screws using the Phillips #1 screwdriver.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.