Ga door naar hoofdinhoud

Base enclosure disassembly

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 2
Base enclosure disassembly, Remove the screws of the service door's area & battery bay: stap 0, afbeelding 1 van 2 Base enclosure disassembly, Remove the screws of the service door's area & battery bay: stap 0, afbeelding 2 van 2
Remove the screws of the service door's area & battery bay
  • Using a PH#00 screwdriver remove the two Phillips PM2.5x5 screws of the service door area. Group these screws together.

  • Using a PH#00 screwdriver remove the three remaining Phillips PM2.5x3 screws of the service door area. Group these screws together.

  • Using a PH#000 screwdriver remove the seven small Phillips PM1.5x2 screws of the battery bay. Group these screws together.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.