Dell XPS M1330 RAM Replacement

Stap 1 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 1

Geen afbeelding

Removing the Memory Module

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE: If there is a memory module in DIMM 2, remove it prior to removing the memory module from DIMM 1. Failure to do so could result in damage to both memory modules
Turn the computer over and loosen the three captive screws and the M2.5 x 5-mm screw. Remove the module cover.
Remove the module from the connector.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.