Ga door naar hoofdinhoud

Gameboy Advance AGS-101 Blacklight Mod

Engels
Nederlands
Stap 13
Gameboy Advance AGS-101 Blacklight Mod, Solder the red cable: stap 0, afbeelding 1 van 3 Gameboy Advance AGS-101 Blacklight Mod, Solder the red cable: stap 0, afbeelding 2 van 3 Gameboy Advance AGS-101 Blacklight Mod, Solder the red cable: stap 0, afbeelding 3 van 3
Solder the red cable
  • This is the pin you need! It's the LEFT leg of DA1 !

  • Put tape on the other IC's. Just to prevent bridges and just to be sure that you have the correct pin.

  • Solder the red cable to the LEFT leg of DA1.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.