Ga door naar hoofdinhoud
Engels
Nederlands
Stap 12
Open the ZIF connector again and put the cable back in. If the cable won't fit, please check your adapter and repeat step 21. Close the ZIF connector with the LCD ribbon cable in. Make sure the red cable from the adapter is at it's place as shown in the 2nd picture.
Attach ribbon cable
  • Open the ZIF connector again and put the cable back in.

  • If the cable won't fit, please check your adapter and repeat step 21.

  • Close the ZIF connector with the LCD ribbon cable in. Make sure the red cable from the adapter is at it's place as shown in the 2nd picture.

  • The 3rd picture shows how it needs to be.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.