Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.
Stap 2 vertalen
Stap 2
-
Remove the two 3mm screws that secure the base cover to the computer with a Phillips #00 screwdriver.
-
Press the rubber tabs towards the rear of the computer to disengage the base cover.
-
Flip and remove the base cover from the computer.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.