Ga door naar hoofdinhoud

HP Compaq Presario V3000 Palmrest/Touchpad Replacement

Engels
Nederlands
Stap 2
HP Compaq Presario V3000 Palmrest/Touchpad Replacement, Remove palmrest screws: stap 0, afbeelding 1 van 3 HP Compaq Presario V3000 Palmrest/Touchpad Replacement, Remove palmrest screws: stap 0, afbeelding 2 van 3 HP Compaq Presario V3000 Palmrest/Touchpad Replacement, Remove palmrest screws: stap 0, afbeelding 3 van 3
Remove palmrest screws
  • Remove the six screws securing the palmrest to the base.

  • Remove all three covers, as well as the screw securing the optical drive. Pull the optical drive out.

  • Remove the single screw securing the hard drive caddy.

  • Remove the two screws from where the optical drive was.

  • Lift the hard drive caddy out of the laptop.

  • Remove the three screws from under where the hard drive caddy was.

  • Remove the single remaining screw holding the palmrest from the bottom.

  • Also remove the wireless antennas from the wireless card, as well as the wireless card.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.