Wijzigingen aan stap #3
Bewerken voor Michelle —
Bewerking goedgekeurd door Jeff Suovanen
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* icon_note] The first three strings (the low E, A, and D strings), have thick and springy ends; the thick end usually has a sticker attached to it. The three thinnest strings (G, B, and high E), do not have thick or springy ends. You may use either set of stings. |
|---|---|
| - | [* black] Insert the thick end of the string into the top of the bridge until about 3 to 4 inches of the string sticks out of the bottom. |
| - | [* black] Wrap the short end of the string around the long end of the string, createing a loop. |
| - | [* black] Pass the short end of the string through the loop 2 or 3 times for the thick strings and 3 or 4 times for the thin strings. Make sure the final pass leaves the string underneath the bridge. |
| + | [title] Thread strings through the bridge |
| + | [* icon_note] The first three strings ( low E, A, and D), have thick and springy ends; the thick end usually has a sticker attached to it. The three thinnest strings (G, B, and high E), do not have thick or springy ends. You may use either set of strings. |
| + | [* black] Insert the thick end of the string into the top of the bridge and thread until about 3 to 4 inches of the string sticks out of the bottom. |
| + | [* black] Wrap the short end of the string around the long end of the string, creating a loop. |
| + | [* black] Pass the short end of the string through the loop (2 or 3 times for thick strings; 3 or 4 times for thin strings). Make sure the final pass leaves the string underneath the bridge. |
| [* black] Pull both ends of the string until the knot is tight. |