Wijzigingen aan stap #1
Bewerken voor Geoff Wacker —
Bewerking goedgekeurd door Geoff Wacker
- Voor
- Na
- Ongewijzigd
Stap regels
| [* red] Gently wedge the plastic opening tool under the ribbons where each of the two cables are connected, and gently lift up to detach the cable. This will allow you to remove the motherboard. | |
| + | [* icon_caution] The rear-facing camera may be held down to the frame with two sided tape. Try to move the camera with the spudger prior to lifting the motherboard If it does not budge, use the same tool to pry it from the frame to avoid damaging the connector cable in the next step. |