Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerken voor Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

-[* red] Remove the middle two 9.5 mm Phillips #0 screws from the top edge and the one 9.5 mm Phillips #0 screw from the right edge of the computer case with the Phillips #0 Screwdriver.
-[* yellow] Remove the two 4.3 mm Phillips #0 screws from the upper corners of the case with the Phillips #0 Screwdriver.
-[* blue] Remove the one 17.5 mm Phillips #0 screw from the left edge of the case using the Phillips #0 Screwdriver.
-[* green] Remove the three 17.1 mm Phillips #0 screws from the bottom edge of the case with the Phillips #0 Screwdriver.
+[* icon_caution] Power off and unplug your laptop before you begin.
+[* black] Turn the laptop upside-down and remove the following screws using a Phillips #0 driver:
+ [* red] Two 9.5 mm screws in the middle of the back edge, and one 9.5 mm screw in the right edge
+ [* yellow] Two 4.3 mm screws in the back corners
+ [* blue] One 17.5 mm screw at the left edge near the optical drive
+ [* green] Three 4.3 mm screws in the front edge