Wijzigingen aan stap #10
Bewerken voor Jeff Suovanen —
Bewerking goedgekeurd door Jeff Suovanen
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Remove the following screws securing the logic board to the rear case: | |
| [* red] Two 2.3 mm Phillips screws | |
| [* orange] Two 2.7 mm standoff screws | |
| [* icon_note] Standoff screws are best removed with a [product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead screwdriver can also do the job—but use extra caution to ensure it doesn't slip and damage surrounding components. | |
| [* yellow] One non-magnetic 2.7 mm standoff screw | |
| [* icon_note] Be sure to put this screw back in its original position at the top of the logic board. A magnetized screw may interfere with the digital compass. | |
| - | [* icon_reminder] Reassembly hint: when putting the standoffs back in, use the tip of a spudger like a screwdriver to get them started. |