Wijzigingen aan stap #1
Bewerken voor Drew Canada —
Bewerking goedgekeurd door Arthur Shi
- Voor
- Na
- Ongewijzigd
Stap regels
| [* red] Use Phillips 0 Screwdriver to remove two (2) 10 mm rear screws. | |
| - | [* orange] Use plastic prying tool to help separate top plastic casing from bottom metal casing. |
| - | [* icon_caution] When opening the device, pay attention to the ribbon cable |
| + | [* orange] Use a plastic prying tool to help separate the top plastic casing from the bottom metal casing. |
| + | [* icon_caution] When opening the device, pay attention to the ribbon cable circled in image 3. |