Intro-historie: Nintendo Switch LCD Replacement
Bewerken voor Arthur Shi —
Bewerking goedgekeurd door Arthur Shi
- Voor
- Na
- Ongewijzigd
| Time Required Min |
3 uren
1 uur
|
| Time Required Max |
3 uren
2 uren
|
| Imageid |
Voor
Na
|
| Public |
Nee
Ja
|
Handleidingsbenodigdheden
- #1 was empty maar is nu Nintendo Switch Rear Panel Replacement.
- #2 was empty maar is nu Nintendo Switch Micro SD Card Reader Replacement.
- #3 was empty maar is nu Nintendo Switch Shield Plate Replacement.
- #4 was empty maar is nu Nintendo Switch Battery Disconnect Prerequisite.
- #5 was empty maar is nu Nintendo Switch Heat Sink Replacement.
- #6 was empty maar is nu Nintendo Switch Headphone Jack and Game Card Reader Replacement.
- #7 was empty maar is nu Nintendo Switch Screen Replacement.
- #8 was empty maar is nu Nintendo Switch LCD and Digitizer Separation.
Gereedschap
- Tri-point Y00 Screwdriver x1 added.
- JIS #000 Screwdriver x1 added.
- Tweezers x1 added.
- Microfiber Cleaning Cloths x1 added.
- Isopropyl Alcohol x1 added.
- Thermal Paste x1 added.
- iFixit Opening Tool x1 added.
- iOpener x1 added.
- iFixit Opening Picks (Set of 6) x1 added.
- Suction Handle x1 added.
- Phillips #000 Screwdriver x1 removed.
- Pry Bar x1 removed.
Stappen
Stap #: 1
Voor
Na
