Repareer je spullen Gemeenschap Winkel

PowerBook G4 Titanium DVI Airport Card Replacement

Inleiding

Install an original Airport 802.11b card internally.

Wat je nodig hebt

  1. PowerBook G4 Titanium DVI Airport Card Replacement, Battery: stap 1, afbeelding 1 van 2 PowerBook G4 Titanium DVI Airport Card Replacement, Battery: stap 1, afbeelding 2 van 2

    • Locate the battery release tab on the underside of the G4.

    • Slide the battery release tab to the left and lift the battery out of the computer.

    Bewerken

  3. PowerBook G4 Titanium DVI Airport Card Replacement, Lower Case: stap 2, afbeelding 1 van 2 PowerBook G4 Titanium DVI Airport Card Replacement, Lower Case: stap 2, afbeelding 2 van 2

    • Remove the seven T8 Torx screws from the lower case.

    • Using your thumbs, slide the lower case toward the front of the computer.

    • The lower case may stick in the front on a tab just above the center of the optical drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

    • Lift the lower case off.

    Bewerken

  4. PowerBook G4 Titanium DVI Airport Card Replacement, Airport Card: stap 3, afbeelding 1 van 1

    • Firmly grasp the plastic tab attached to the Airport card and pull up and to the left.

    • Disconnect the antenna cable from the left side of the Airport card.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

19 andere personen hebben deze handleiding voltooid.

Bijgevoegde documenten

Auteur

met 1 andere bijdrager

iRobot

Lid sinds: 09/24/09

1 Reputatie

636 handleidingen geschreven

Medailles: 36

+33 andere badges

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 17

Altijd: 22,303