Google Pixel Buds 2a Bottom Shell Replacement - iFixit reparatiehandleiding

Word lid van de reparatiegemeenschap - Account aanmaken

Inleiding

This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.

Follow this guide to replace the bottom shell on the charging case for your Google Pixel Buds 2a headphones.

Wat je nodig hebt

1. Stap 1 Unplug the charging case
  Before starting your repair, unplug your charging case.
  Bewerken
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
2. Stap 2 Remove the Buds
  Open the case lid, remove the Pixel Buds, and set them aside.
  Bewerken
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
4. Stap 3 Remove the case screws
  Use a T5 Torx screwdriver to remove the two 6.2 mm‑long screws from the ear bud recesses.
  
  You may need to flip the case over and gently shake it to get the screws to fall out.
  Bewerken
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
5. Stap 4 Remove the bottom shell
  Slide the main body of the charging case completely out of the bottom shell, inserting a fingernail in the seam near the top of the case to create an initial gap.
  
  If you're having trouble, use the flat end of a spudger to start the initial gap.
  Bewerken
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024

Conclusie

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Annuleren: ik heb deze handleiding niet afgemaakt.

Auteur

met 1 andere bijdrager

Spencer Day

Lid sinds: 09/14/22

198.650 Reputatie

1.243 handleidingen geschreven

+36 andere badges

0Gids Commentaar

Weergavestatistieken:

Afgelopen 24 uren: 5

Afgelopen 7 dagen: 10

Afgelopen 30 dagen: 36

Altijd: 318