Inleiding

This guide will show you how to remove the lower case and replace it with a new one.

Onderdelen

Geen onderdelen nodig.

Remove the battery from the bottom of the laptop.
  • Remove the battery from the bottom of the laptop.

  • Please click on the following link for further instruction on how to remove the battery. Dell Inspiron 9100 Battery Replacement

  • It is important to remove the battery so that you will not be electrocuted while working with the computer's hardware.

Voeg opmerking toe

Insert a spludger into the notch at the far left side of the top blue panel and pry hinge cover off. Note: You may need to pry the other side off by inserting the spludger between the hinge and the top cover. Be careful of wire attached to underside of the hinge cover.
  • Insert a spludger into the notch at the far left side of the top blue panel and pry hinge cover off.

  • Note: You may need to pry the other side off by inserting the spludger between the hinge and the top cover.

  • Be careful of wire attached to underside of the hinge cover.

Voeg opmerking toe

Pull the small black tab on the right hand side of the laptop.
  • Pull the small black tab on the right hand side of the laptop.

  • The hinge cover has now been removed.

Voeg opmerking toe

Remove the screws at the top of the keyboard as indicated indicated. Do not just lift up, there is a tab underneath the keyboard that is still connected to the mother board. You will need to pull out the white tab underneath the keyboard upwards until it pops out of its socket.
  • Remove the screws at the top of the keyboard as indicated indicated.

  • Do not just lift up, there is a tab underneath the keyboard that is still connected to the mother board.

  • You will need to pull out the white tab underneath the keyboard upwards until it pops out of its socket.

  • The keyboard should be easily removable at this point.

Voeg opmerking toe

Flip the laptop over and remove the indicated screws. Flip the laptop back over.
  • Flip the laptop over and remove the indicated screws.

  • Flip the laptop back over.

  • Find the two places where the display module is attached to the base of the computer.

Voeg opmerking toe

Disconnect the video card from the display module by gently lifting upwards on the black tab.
  • Disconnect the video card from the display module by gently lifting upwards on the black tab.

Voeg opmerking toe

Lift the display module directly upwards from the base of the computer. Lift the display module directly upwards from the base of the computer.
  • Lift the display module directly upwards from the base of the computer.

Voeg opmerking toe

The display module has been removed.
  • The display module has been removed.

Voeg opmerking toe

Pop the upper case off, and replace.
  • Pop the upper case off, and replace.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

John Nesthus

Lid sinds: 13-04-11

183 Reputatie

6 handleidingen geschreven

Team

Cal Poly, Team 18-22, Garner Spring 2011 Lid van Cal Poly, Team 18-22, Garner Spring 2011

CPSU-GARNER-S11S18G22

4 Leden

15 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 10

Altijd: 2,793