Repareer je spullen Gemeenschap Winkel

The Xbox One S, designed by Microsoft Corporation, was released on August 2016. The Xbox One S is a redesign of the Xbox One.

428 Vragen Bekijk alle

Opties

Why does my Xbox One S turn off immediately?

Note: I already replaced the power supply with a fully working one from iFixit (New) but it still gave the same result.

After accidently dropping my Xbox, it beeps and turns on for about 5 to 10 seconds then shuts off. I have a feeling that it's an issue with the hard drive as it makes a charm after the Xbox One S turns off, but I just want to make sure as I don't just want to waste money.

Update (06/02/2022)

Front Mother Board - https://imgur.com/a/rswPhrX

Now after viewing the backside, I was totally surprised to see how dirty it was. Water Damage? Now that I think of it, I think it's the motherboard which sucks lol.

Link: https://imgur.com/a/ucfK4ZW

Block Image

Block Image

Block Image

Block Image

Block Image

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

@xdstarr definitely some water damage. First thing you need to do is to clean that board. Remove the heatsink etc from it and get some high grade (+90%) isopropyl alcohol. Poor it in containing large enough for your motherboard and then soak the board. Use a couple of soft brushes and "gently" clean the board. You do not want to scrub it since that potentially could knock components of the board. You can use something like this guide Even so it was written for an iPhone logic board, all the points are still pertinent to your board as well. While you are cleaning it, you need to look for any burned, charred or missing components. Those can be replaced and traces can be fixed if needed. Post some good, clear, large pictures with your QUESTION after it's cleaned so that we can see what you see. Pay particular attention around area D9 on your board since that is where the power IC's etc. are located. Voeg afbeeldingen toe aan een bestaande vraag

iPhone Afbeelding

Handleiding

Repairing iPhone Liquid Damage

Moeilijkheid:

Moeilijk

—

1 - 2 hours
iFixit Afbeelding

Handleiding

Voeg afbeeldingen toe aan een bestaande vraag

Moeilijkheid:

Zeer eenvoudig

—

2 - 5 minutes

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Opties

i see a lot of red flags man can u show me the bord Cuz it could be its not getting power or a component on the bord could have broken or even a loose port so i need more info plz

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

sarry buddy i think u should take it to someone for a second pair of eyes u know what i mean i am limited by pixels lol but Ya that looks like it needs work

door

Voeg een opmerking toe

Voeg je antwoord toe

Bryan Jimenez zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 24

Altijd: 435