Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus. Identifiable by the model numbers A1549, A1586, and A1589.

4427 Vragen Bekijk alle

Lightening port press hard to get the iPhone 6 to charge issue

Hi, I have a issue with my iphone 6 that I have to apply pressure to the lightening port to get the iphone 6 to charge. How can I fix or troubleshoot this issue?

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

3 Antwoorden

Gekozen oplossing

hi stephen sizensky

i tink some dust inside the charging port... just clean the dust it will work

Block Image

Was dit antwoord nuttig?

Score 5

Commentaar:

Hi, it worked for a while then it suddenly stopped working. I cleaned again. What are some tricks of the trade for cleaning?

door

Anything small and pointy will work. Try using an alcohol wipe. Make sure you let it dry before plugging it in. Make sure the cable is flush with the phone. If it isnt there is still more dust to get out. It can take a few tries to get it all out

door

Een opmerking toevoegen

Ok, so gently clean with something small. Metal is ok. Be gentle. If that doesn't take, replace the lightning dock. Here's a guide

iPhone 6 Lightning Connector Assembly Replacement

Here's parts

iPhone 6 Lightning Connector and Headphone Jack

If you don't trust yourself to do it. Don't. Any good repair shop should have this done in 20 mins, for $40

iPhone 6 Lightning Connector and Headphone Jack afbeelding

Product

iPhone 6 Lightning Connector and Headphone Jack

$24,99

Was dit antwoord nuttig?

Score 1
Een opmerking toevoegen

This is a simple fix.

Your charging port is dirty. Filled with fine dust particles or pocket lint. Basically, the white part of your charger should touch the phone itself. If there is a gap, it'll need to be cleaned. The harder you press, the more compact it becomes. Use a tooth pick to dig at the port. Be careful not to damage on the prongs. These are near the bottom. I don't recommend using a metal pick as it damages the port very easily. Tooth brush can sometimes work as well. Do this and you'll be up and running in no time.

Was dit antwoord nuttig?

Score 0

Commentaar:

vinod above basically said the exact same thing.

door

There was no answer as I was typing this answer. Posted it and noticed someone else posted something too.

door

Een opmerking toevoegen

Voeg je antwoord toe

Stephen Sizensky zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 3

Altijd: 166