Deze versie is geschreven door: Sebastian

Titel:

iMac internal DisplayPort header on Logic Board—replacing broken pin?

Tekst:

I have a Logic Board with exposed pins where the internal DisplayPort connector should be. The female connector ripped off and bent some of the pins. When I attempted to bend the pins back and reattach the connector, one of the pins broke off:

[image|2288392]

If I had a replacement header pin, I should be able to solder it onto the empty pad and reattach the connector. Anybody have an idea where I can get suitable pins?

Toestel:

iMac Intel 27" EMC 2309 and 2374

Status:

open

Goedgekeurd antwoord:

Origineel bericht door: Sebastian

Titel:

iMac internal DisplayPort header on Logic Board—replacing broken pin?

Tekst:

I have a Logic Board with exposed pins where the internal DisplayPort connector should be. The female connector ripped off and bent some of the pins. When I attempted to bend the pins back and reattach the connector, one of the pins broke off:

[image|2288392]

If I had a replacement header pin, I should be able to solder it onto the empty pad and reattach the connector. Anybody have an idea where I can get suitable pins?

Toestel:

iMac Intel 27" EMC 2309 and 2374

Status:

open