sharpshooter6135, Remember you are working with electricity around water and can be dangerous.It is not recommended to join wires together, use a jumper wire for testing purposes only and change the switch. Do not jump anything to the green wire on the plug. Links below will show how to test switch and explain using a jumper wire for testing. Good luck.
+
sharpshooter6135,
+
+
If you are having problems with your washing machine’s lid switch, see the [https://www.ifixit.com/Wiki/Kenmore_110_Series_Washing_Machine_Doesn%E2%80%99t_Stop_Spinning_When_Lid_Is_Opened?revisionid=HEAD|Kenmore 110 Series Washing Machine Doesn’t Stop Spinning When Lid Is Opened problem page] for possible causes and solutions.
+
+
Remember you are working with electricity around water and can be dangerous. It is not recommended to join wires together, use a jumper wire for testing purposes only and change the switch. Do not jump anything to the green wire on the plug. Links below will show how to test switch and explain using a jumper wire for testing. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
sharpshooter6135, Remember you are working with electricity around water and can be dangerous.It is not recommended to join wires together, use a jumper wire for testing purposes only and change the switch. Do not jump anything to the green wire on the plug. Links below will show how to test switch and explain using a jumper wire for testing. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
https://www.applianceblog.com/mainforums/threads/36344-kenmore-washer-model-110-23812100-lid-switch-internal-diagram
http://www.partselect.ca/Guide+Repair+repair.htm
https://www.youtube.com/watch?v=MFsvLiuTniU