Geschiedenis van "Do I need to replace the washer display control board?"

	Talitha, double check first to see if your washer is one of those that got recalled. Check [http://www.cpsc.gov/en/Recalls/2013/LG-Recalls-Top-Loading-Washing-Machines-Due-to-Risk-of-Injury/\|on here.] There are some issues that the UE error may remain even if you change the control board. double check the following as well
-
-	1) Warped STATOR
-
-	2) Out of Balance SPIN BASKET
-
-	3) Software glitch (unlikely)4) failed Hall sensor
+	1) Warped stator
+	2) Out of Balance spin basket
+	3) Software glitch (unlikely)
+	4) failed Hall sensor

Status:

open

22 sep. 2015

Origineel bericht door: oldturkey03

Tekst:

Talitha, double check first to see if your washer is one  of those that got recalled. Check [http://www.cpsc.gov/en/Recalls/2013/LG-Recalls-Top-Loading-Washing-Machines-Due-to-Risk-of-Injury/|on here.] There are some issues that the UE error may remain even if you change the control board. double check the following as well

1) Warped STATOR

2) Out of Balance SPIN BASKET

3) Software glitch (unlikely)4) failed Hall sensor

Status:

open