My cube has the ribbon cable attached to the control board mounted on the top of the cube. Technically that means it is attached to the cover and needs to be gingerly removed to take assembly out.

I suggest marking the cable and the connector on one side so it is easyto re-install

My pad had hose clamp screws that were near the top however, they were way to large to use apprpriate screw driver.

The solution was to just lift the top off.

Hint, use a flash light to look through the small holes, these screws were black n0t silver

please let me know fan number or amazon thinb, 6loves@gmail.com

I love you with my whole heart, this os totally understandable well detailed article

My chilicube runs endlessly on hot 3-6 hrs

Then on cold and then it starts squealing like tortured pig giving birth to a Ghila monster.

Might be motor or condenser can you help me with this, they claim its dust on motor, dollowed by give me 700$

Help jean.

Ps yes this is well with in my capacity to do as shown