“No battery detected” after install.. :-(
Griddle and an IR thermometer is another option
I used a ceramic griddle (screen face down), an IR thermometer (the kind you use to take forehead temperature with), and a no longer, used plastic card from my wallet (probably a bit thicker than I’d like, but still worked). Note that the screen had already partially dislodged due to a battery bulge. Tried to keep it around 150-180 deg F, and not going over ~200 deg F as it sat on the griddle - few minutes at a time and then pushing card through. Hand is sore from the pressure needed, but no cracks in the screen from what I can tell. Might have slightly damaged the antennas, but device still turned on (yeah, I was trying to be careful not to electrocute myself or short anything inside when I did this). I like the idea of heating a knife blade directly, but I’d be a bit more worried about the screen cracking, damaging internals, or shorting things out using something metal and sharp. Seemed that the top needed to be a bit deeper to dislodge, and I’m glad I dislodged the top last per a comment below.
Zodra ze een reputatiescore hebben bent je in staat om een grafiek te zien van het verloop hiervan.
Hier is een voorbeeld van hoe de grafiek eruitziet:
Nog geen reputatiescore gekregen.