Deze gebruiker heeft hun profiel nog niet ingevuld.
Vragen
runs 10.4.11, well, but will only load 10.5 if I remove 3 of the 4 ram chips. When I replace them it is unstable (4x 512...
Meer informatieif started up normally, it chimes, the screen comes on with the apple and the spinning wheel. then it goes into a blank...
Meer informatieis it possible to remove, polish out a scratch on a flat screen
Meer informatiethe machine does not like it, and keeps failing on installing. It is supposed the be able to take it.
Meer informatiethe draw catches on the pretty oval opening, and does not open. I have removed the bezel, should I cut the openings more...
Meer informatieThe first came from the machine with the burn out chip, it is solid, looks like it was cut from a solid block of...
Meer informatieI have a Fiat punto-Mk1 55-1.1 1995 the speedometer, drops to 0 for a short time then works again perfectley about once a...
Meer informatieG4, dual 1.25, M8570 when trying to start one fan starts, after five seconds a second much louder fan starts and thats all.
Meer informatieAntwoorden
I have that problem, managed to get it to load by removing additional ram. Runs unstabley with ram replaced, still fiddeling about trying to solve
Meer informatieit was the speed sensor, on the back of the gearbox. goes quite often peter, thanks
Meer informatieif the camera is a play toy, and the only problem is sticky buttons, then wash it again, it might need a soak to get the dried residue off.It would have been better it you washed it immediatley to get rid of the beer Firstly; remove the battery and ensure there is no charge left,and any cards. Then start with warm water and an old tooth brush, the a final rinse with distilled water, leave for many days in a warm place, near the back of the fridge is good.
Meer informatieno chime sound, keyboard dead, monitor no reaction, I took off the heat sink, and the top of the processors looks brown, and minimal thermal compound on it, should I put new paste on it, is this causing the chip to heat up and put the 'super' fan on?
Meer informatiepeter
@peter70574
69
Reputatie
4
Oplossingen
0
Handleidingen
Lid sinds 08/27/10