You have a short somewhere in your wire to the light bulb. Your Manual will have a diagram for all the wiring. Find the wire going to that bulb and fix it. Don’t forget to check your fuses as well it could be as simple as that.
Ace hardware might have them, check here as well >> https://beetstech.com/product/t5-torx-battery-screws-a1370-a1465-2010-2011-2012-2013-2014-2015?gclid=CjwKCAiA24PVBRBvEiwAyBxf-SXBbh7Ve_-lSgilfx59xlwhyOegM2qCr4RaK7B26eBCC1D6agz...
Check the wattage of your new bulbs and put a fuse that’s able to provide as much power to the bulbs without burning the fuse. Your stock fuse is only made to specs of original bulbs. Goodluck!
Unfortunately, I looked up your vehicle and it appears that you have pressed bearings, meaning you can’t undo couple bolts and put a new one, you have to have a press and a couple other tools. Your best bet is to take it to a shop, it’ll pay off just not having to do it yourself it’s a pain. Unless you like working on cars then look up “how to replace pressed-in bearings” Goodluck!
