Yes, you can reset your Bios or UEFI password if you forgot it. (works on UEFI based laptops at least... don't know if it will work on everything) This only works if you can boot into windows (or other OS) ! It will reset you BIOS or UEFI password if you have forgotten it. - Boot into windows and change the date to 2002/01/02, - Reboot while while hitting F2 to get into the BIOS / UEFI, when the enter password window appears hit "Alt + r", a "Enter rescue password" window will appear, with 2002/01/02 date showing (if not the code won't work), enter the following rescue password : ALAA4ABA - Done ! You're in the BIOS / UEFI - Change back the date and other settings to their correct values in the BIOS / UEFI, save settings, and you're good. Thanks to https://www.youtube.com/watch?v=NZfFcHtY... for the solution !

Here's how to easily reset your BIOS or UEFI password on Asus laptops: This only works if you can boot into windows (or other OS) ! It will reset you BIOS or UEFI password if you have forgotten it. - Boot into windows and change the date to 2002/01/02, - Reboot while while hitting F2 to get into the BIOS / UEFI, when the enter password window appears hit "Alt + r", a "Enter rescue password" window will appear, enter the following rescue password : ALAA4ABA - Done ! You're in the BIOS / UEFI - Change back the date and other settings to their correct values in the BIOS / UEFI, save settings, and you're good. On the internet, you can even find whole lists of date/password couples to enter in the "Enter recovery password" window, i used the one above which worked perfectly... Thanks to https://www.youtube.com/watch?v=NZfFcHtY... for the solution

Citaat van ascent:

Hi Chris, do you know anything about the question I asked in Step 20? I tore off a little square piece where the black wire was soldered. Should I try soldering it on the same spot or I should put it somewhere else? Thanks!

I have the same problem, but a litle different, tore off the little square where the white wire was soldered. Same question, should I try to solder on the same spot, or somewhere else ?