Deze gebruiker heeft hun profiel nog niet ingevuld.
Vragen
I had a customer bring me an iPad 5 that doesn’t charge. I managed to get it to charge at 1amp sometimes but most times it...
Meer informatieHey everyone, I just received a Macbook Pro early 2015 13” 820 4924-A 004 board… Customer said the fan was running loud...
Meer informatieI have a Samsung Galaxy S6 come in for repair and customer told me they were using it one day and it decided to shut off...
Meer informatieHey everyone, i am an active member to the ifixit forum, however I have a question about a mod I’ll be performing. I’ve...
Meer informatie"I’ve changed an iPhone 6 battery twice now and it will show 100 percent capacity in settings battery and also coconut...
Meer informatieHello, I am going to be starting to solder, and my goal is to become good at microsoldering on iphone, ipads, and other...
Meer informatieI have an Iphone 6s plus here and it charges slower than average. Sometimes when i go to charge it, it will go down a...
Meer informatieHello, I changed the logo on my iphone 6s pls to liht up, but after i assembled everything works great but now the...
Meer informatieHello, I have a Nokia Lumia 1020 here but I broke the power/volume key FPC Connector on the logic board. I can see a gold...
Meer informatieHello, I really do have an issue here. I have an ipad 3rd gen with 3g built in but I go to use the ipad and it will be...
Meer informatiePagina 1 van 2
Antwoorden
No there is no way to solder them together to have the device think that the wireless coil is installed. bridging pins is a bad idea and you risk shorting the phone completely and possibly beyond repairable . buy the replacement (it’s only $20) and fix it the proper way.
Meer informatieCan you try updating the driver to your external keyboard and let me know? Possibly you may need to change the batteries and try changing USB ports for the wireless connection
Meer informatieThey are ph0 (philips heads screw bits)
Meer informatieSounds like you would need to change the battery . I’d suggest you try that and let me know
Meer informatieNo they are not supported. You have to use the proper LCDs in this model. It will kinda work but it will have distortion like you mentioned above. You can read more about the compatibility between the two at: https://ifixit.org/blog/8977/2017-ipad-parts-compatibile/
Meer informatieThe only way to recover data off the device is to replace the screen. Samsung designed it where you cannot read with the computer unless you click allow on the phone to access the data for security reasons. That blackness will go away when you replace the entire display also
Meer informatieI’d try replacing the battery and see what happens. They are at that peak where they have to be replaced anyways
Meer informatieIt’s because you are prying the home button flex off the screen and damaging it. There is a chip right smack in the middle of the home button called your u10 chip (look it up on google) that is being damaged when you are transferring . That’s is why the button doesn’t work anymore . You can have a board level repair technician replace the chip or you can purchase a third pardty aftermarket home button return kit on eBay . As soon as you break the home button flex, it’s non repairable and apple would replace the entire phone… With a successful repair, the home button will continue to work normally. Either the home button is damaged or the FPC connector is
Meer informatieUnfortunately us technicians and other active members don’t have time to record teardowns of every device and also it’s not possible. The process of recording every single device would consume a lot of our time when we have other things to do such as running a electronic repair shop or other matters in our lives. im sure you could make a request, but I’d suggest you take a look at other teardowns of TVs and compare to your TV model. Most of them are the same by removing several screws on the back panel and removing the panel to access the Main Boards, and t con boards, etc
Meer informatieThe newer laptops do not use inverters anymore as they all use LEDs now that are built into the panel. The LCD connector on the logic board is what drives backlight power to the LEDs in the screen. Most likely you have a blown backlight IC or filter on the logic board and only be able to repair with schematic experience and board level
Meer informatiePagina 1 van 3
Daniel
@daniel64881
347
Reputatie
27
Oplossingen
0
Handleidingen
Lid sinds 07/14/15