Ga door naar hoofdinhoud

This teardown is done as to comply with the task 2 IDES 2171. Photographed and written by Ashley Mutandiro and Aisyah Azmi, first year students of Bachelor of Industrial Design UNSW Sydney, Australia.

Wat je nodig hebt

Gereedschap

Toon meer…

iFixit krijgt commissie als je dingen koopt via deze links.

Deze demontage is geen reparatiehandleiding. Om je Toaster te repareren, gebruik onze reparatiehandleidingen.

  1. Teardown: Breville Toaster, Breville Toaster Teardown: stap 1, afbeelding 1 van 1
    • Breville Toaster.

    • The toaster before the teardown process.

  2. Teardown: Breville Toaster: stap 2, afbeelding 1 van 3 Teardown: Breville Toaster: stap 2, afbeelding 2 van 3 Teardown: Breville Toaster: stap 2, afbeelding 3 van 3
    • Turn the toaster upside-down.

    • Use the drill to unscrew the six slotted Spanner head screws

    • Use the drill with corresponding screwdriver bit to remove the Truss Phillip screws

    • The Slotted Spanner head screws hold the four rubber feet at the bottom of the casing.

  3. Teardown: Breville Toaster: stap 3, afbeelding 1 van 1
    • Unattach the four rubber feet.

  4. Teardown: Breville Toaster: stap 4, afbeelding 1 van 3 Teardown: Breville Toaster: stap 4, afbeelding 2 van 3 Teardown: Breville Toaster: stap 4, afbeelding 3 van 3
    • Detach the timer knob using a flat head screw driver

    • Remove the internal components from the red casing

  5. Teardown: Breville Toaster: stap 5, afbeelding 1 van 3 Teardown: Breville Toaster: stap 5, afbeelding 2 van 3 Teardown: Breville Toaster: stap 5, afbeelding 3 van 3
    • Note: Red casing is still attached to the interior body of the toaster.

    • Detach electric circuit housing from red casing

  6. Teardown: Breville Toaster: stap 6, afbeelding 1 van 2 Teardown: Breville Toaster: stap 6, afbeelding 2 van 2
    • Firstly, unscrew the four Pan Phillip head screws

    • Then snap off the three welded plastic studs to detach the timer knob housing from the red casing

  7. Teardown: Breville Toaster: stap 7, afbeelding 1 van 3 Teardown: Breville Toaster: stap 7, afbeelding 2 van 3 Teardown: Breville Toaster: stap 7, afbeelding 3 van 3
    • Unfasten the two Pan Phillip head screws to detach the buttons' housing

  8. Teardown: Breville Toaster: stap 8, afbeelding 1 van 3 Teardown: Breville Toaster: stap 8, afbeelding 2 van 3 Teardown: Breville Toaster: stap 8, afbeelding 3 van 3
    • Note: There are two housings attach to both side of the interior body of the toaster.

    • Remove the two Pan Phillip head screws to detach the circuit board from the heat controller housing.

    • Then, remove the slider as well.

  9. Teardown: Breville Toaster: stap 9, afbeelding 1 van 3 Teardown: Breville Toaster: stap 9, afbeelding 2 van 3 Teardown: Breville Toaster: stap 9, afbeelding 3 van 3
    • Remove the circuit board housing for the heat controller from the interior body of the toaster by unscrewing two Pan Phillip head screws

    • Remove the cable fasteners using a flat head screw driver

  10. Teardown: Breville Toaster: stap 10, afbeelding 1 van 3 Teardown: Breville Toaster: stap 10, afbeelding 2 van 3 Teardown: Breville Toaster: stap 10, afbeelding 3 van 3
    • Separate the interior body of the toaster from the bottom cover.

    • Remove the screw caps

    • Unscrew the two Pan Phillip head screws to detach the aluminium vent

  11. Teardown: Breville Toaster: stap 11, afbeelding 1 van 3 Teardown: Breville Toaster: stap 11, afbeelding 2 van 3 Teardown: Breville Toaster: stap 11, afbeelding 3 van 3
    • Use pliers to break apart the welded wires from the interior body.

    • Snip off the rest of the wires still attached to the interior body using a wire cutter

    • Remove the circuit board from its housing

  12. Teardown: Breville Toaster: stap 12, afbeelding 1 van 2 Teardown: Breville Toaster: stap 12, afbeelding 2 van 2
    • Separate the electric components from the interior body

  13. Teardown: Breville Toaster, Components of the Toaster Teardown: stap 13, afbeelding 1 van 1
    • Insert wisdom here.

Aisyah Azmi

Lid sinds: 09/30/18

217 Reputatie

1 Handleiding geschreven

12 opmerkingen

Don’t buy this toaster…They fail and Breville won’t warranty it after 1 year….

Never again Breville..

James Payne - Antwoord

Thank you for this tear down guide. Though it’s built pretty well and feels like a tank, It doesn’t seem very repairable. Mine stopped working a couple months ago and I’m contemplating throwing it out. Comments?

David Vileta - Antwoord

any chance you still have the electronics for the toaster. Mine stopped working. It’s not the heating element. I THINK the issue is one of the components on the circuit board failed. I’ll buy the harness with the PCB from you, if it’s still around. Thanks.

Riccardo - Antwoord

Thanks very much for posting all of this, gave me the confidence to 'go in'.

Foe anyone thinking of doing what I just did; the guts of a plastic cased model can be put into a metal cased model but there are a few differences but everything you need is there.

Sean Johnson - Antwoord

Purchased a Breville die cast 2 slice toaster ($160). After one year it stopped toasting evenly and then on the out side of one slice. I am capable of fixing this but Breville will not sell parts, they want you to buy a new one. My first and last Breville product.

Lou Viscomi - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 10

Afgelopen 7 dagen: 34

Afgelopen 30 dagen: 130

Altijd: 21,571