The Teardown is pretty much the same as other Samsung Slider phones
Deze demontage is geen reparatiehandleiding. Om je Samsung Intensity te repareren, gebruik onze reparatiehandleidingen.
-
-
-
Remove the 8 screw that hold the back cover down.
-
Carefully pry back piece off
-
Start at the bottom and work toward the top.
-
-
-
-
Carefully remove the main board
-
Make sure to not tear the microphone cable, pry it from the phone carefully
-
-
-
Remove the 4 screw the holds the slider to the phone assembly
-
one of the screws will be behind the hinge
-
Carefully pry slider assembly loose from display assembly
-
-
-
-
LCD comes out pretty easily
-
Pry it from the bottom and work up the sides to release it if stuck
-
The glass can be removed with a little heat from a heat gun or blow dryer
-
Pry it out from the outside edges working around carefully
Deze handleiding insluiten
Kies een formaat en kopieer de code hieronder om deze handleiding als een kleine widget op je website of forum in te sluiten.
Voorbeeld