Gereedschappen die in deze demontage worden gebruikt
-
Red arrows indicate which screws must be removed in order to get to the motherboard.
-
Take T5 torx and remove all 3 screws.
-
Wedge a flat head in between the back and phone exterior starting at the bottom corners.
-
As you move toward the top, remove the camera and volume buttons.
-
Remove the back, being careful not to detach the motherboard from the back and to not pull them fully out (both attached at the upper left corner by a black strip).
Team
University of Maryland, Team 1-7, Calloway Fall 2013 Lid van University of Maryland, Team 1-7, Calloway Fall 2013
UMD-CALLOWAY-F13S1G7
3 Leden
1 handleiding geschreven
