Well, actually ended up taking it apart, thinking it was broken anyway! Find that the connecter to the top 4 buttons to the main board had some corrosion on the cable so I tried cleaning those up a little bit. I had to snip the ribbon cable tip off just a little bit but Putting it all back together. I accidentally ripped the ribbon cable at the connecter. so I thought, “well I’ll just try to shave a little bit of the casing off..” using a metal blade I must have completed the power circuit cause it turned on! I kept going and sure enough, pairing mode triggered and I connected to my phone and works like normal! Even tho the power/bt buttons aren’t connected! Lol know where to get a replacement ribbon cable?!

My gratitude cannot be fully expressed through words for what you have shared. Thank you for being a role model to follow. papa’s freezeria

My thanks cannot be enough to express the care and valuable knowledge you have shared. Thank you for being a trusted source of inspiration. papa’s freezeria

Home theter

Dapic

Mother board

Problem

Emily Emily where are you?

Just when i thought you were going to be useful you have disappeared

Emily, Anyone home? Still no answer EMILY where are you???

This was fixed with a hard drive replacement.

This was fixed with a hard drive replacement.

@chrisbickley it sounds like an issue with the backlight power. You said you repave the LCD screen and the Driver board but you did not tell us what you are referring to as the driver board. This could easily be an issues with a DC-DC converter. Check the Backlight (BL) connector on the main board as well as on the LCD connector for DC power.

[image|3356559]

@chrisbickley it sounds like an issue with the backlight power. You said you repave the LCD screen and the Driver board but you did not tell us what you are referring to as the driver board. This could easily be an issues with a DC-DC converter. Check the Backlight (BL) connector on the main board as well as on the LCD connector for DC power.