Repareer je spullen

Recht op reparatie

Winkel

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 20 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Nederlands
Vorige stap

Stap 6 vertalen

Stap 6
Use the exposed clear plastic pull tab to peel the battery off the adhesive securing it to the iPhone. Be careful not to pull the plastic pull tab too hard as it can be ripped off very easily.

  • Use the exposed clear plastic pull tab to peel the battery off the adhesive securing it to the iPhone.

  • Be careful not to pull the plastic pull tab too hard as it can be ripped off very easily.

  • Remove the battery.

  • If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the ribbon cable.

  • If your replacement battery came with an uncreased cable, carefully crease the cable into the proper shape before installing the battery into the phone.

  • While installing the replacement battery, temporarily connect the battery connector to the phone to ensure proper alignment. Once the battery is glued in place, disconnect the battery connector.

  • Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.