Ga door naar hoofdinhoud
Stap 6
Once the tabs have been properly located, insert one tool on each side to loosen compress the base and apply downward pressure on the outer handle. For this the top end of the handle needs to rest against a solid base. It does require a considerable amount of downward force to accomplish this. With the tabs loosened and the handle opushed downward, the inner workings of the toothbrush will loosen and pop out of the handle. Remove the mechanics out of the handle.
  • Once the tabs have been properly located, insert one tool on each side to loosen compress the base and apply downward pressure on the outer handle. For this the top end of the handle needs to rest against a solid base. It does require a considerable amount of downward force to accomplish this.

  • With the tabs loosened and the handle opushed downward, the inner workings of the toothbrush will loosen and pop out of the handle.

  • Remove the mechanics out of the handle.

Una volta trovate le alette, infila uno strumento simile al cacciavite del passaggio precedente in entrambi i lati per schiacciare la base e spingere la copertura del manico verso il basso. Per questo passaggio appoggia la parte superiore del manico su una superficie solida. Dovrai fare parecchia forza per completare questo passaggio.

Quando le alette si libereranno e la copertura del manico scivolerà in basso, il meccanismo interno scatterà verso l'alto fuori dal manico.

Rimuovi il meccanismo dal manico.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.