Ga door naar hoofdinhoud

iPhone 3G Battery Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 14 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 13
iPhone 3G Battery Replacement, Remove the logic board: stap 0, afbeelding 1 van 1
Remove the logic board
  • Use a spudger to gently pry up the end of the logic board closest to the dock connector.

  • There is a small golden grounding tab on logic board adjacent to the 'do not remove sticker'. Be VERY careful this does not snag on the side of the case when prying up the logic board; it breaks easily. If you have signal problems after removing the logic board, check this ground tab.

  • If the board won't lift up, double check to make sure all the screws securing the logic board have been removed.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.