/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Lid worden
Inloggen

iPhone 3G 电池更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 14 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Chinees
Stap 6
iPhone 3G Battery Replacement, Disconnect cable 3: stap 0, afbeelding 1 van 1
Disconnect cable 3

  • Please note: You may find on some non-American (Chinese, European) versions of the 3G that the flip up plastic tab does not exist. In this case you would slide the ribbon cable towards the screen until it is removed. When you assemble it, you would apply pressure to the ribbon to insert it back into the ribbon "socket."

  • Some iPhones may have the connector colors reversed (black plastic tab, white connector) for connector "3". Make sure you're flipping up the tab properly, otherwise you may damage the connector.

  • Use a spudger to flip up the white plastic tab holding the ribbon cable "3" in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.

  • Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhone.

断开排线 3

请注意：你可能会发现在某些非美版（如国行版，欧版）的 3G 并没有能翻起来的塑料片。在这种情况下，你可以将排线朝着屏幕方向滑出，直至其被取下。当你装回它时，你可以对排线施加点力来将它插回排线“插槽”。

有些iPhone接口“3”的接口颜色可能是反转的（即黑色的塑料片，白色的接口）。请确保塑料片已经正确地翻起，否则你可能会损伤接口。

使用撬棒翻起固定住排线“3”的白色塑料片。白色塑料片会旋转至 90 度，从而释放排线。

将黑色排线滑出插槽，然后将iPhone的显示部件移除。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.