Ga door naar hoofdinhoud

Remplacement du moteur du Epson Stylus Photo 820

Stap 2
Epson Stylus Photo 820 Driver Motor Replacement: stap 0, afbeelding 1 van 2 Epson Stylus Photo 820 Driver Motor Replacement: stap 0, afbeelding 2 van 2
  • Remove the four screws that hold the motor down.

  • Use a small pair of needle-nose pliers to hold the back nut steady.

  • Be careful not to lose the small washers and grommets under the nut when removing the screws.

Retirez les quatre vis qui maintiennent le moteur vers le bas.

Utilisez une petite paire de pinces à bec effilé pour maintenir l'écrou arrière stable.

Veillez à ne pas perdre les petites rondelles et œillets sous l'écrou lors du retrait des vis.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.