/
Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Lid worden
Inloggen

Sony a7R II 拆机

Terug naar de handleiding
Engels
Chinees
Stap 2
Sony a7R II Teardown: stap 0, afbeelding 1 van 2 Sony a7R II Teardown: stap 0, afbeelding 2 van 2

  • The rear of the camera is adorned with an articulating 3 inch LCD. This is a TFT LCD display with 1,228,800 dots. Dots? What are dots? TIL a dot is (usually) a third of a pixel.

  • Since nobody lists a measurement other than 3 inches for this display, we busted out the calipers and calculator. At 2.5 " x 1.75", and converting from dots to pixels, we came up with around 270 ppi.

  • In short, less than an iPhone (326 for the iPhone 6), but certainly high-density. And that's good, considering that no mirror means no optical viewfinding.

  • The left side of the camera body houses plenty of I/O options—an HDMI micro connector, 3.5 mm stereo microphone and headphone terminals, and a micro-USB connector.

机身背面装配有一块可调角度的3寸液晶屏。这是一块具有122.88万点的TFT液晶屏。点？什么是点？TIL一个点（通常）是一个像素的1/3。

由于没人为这块显示屏列举出3英寸以外的测量，我们突破了游标卡尺和计算器的限定。在2.5" x 1.75"的面积上，进行了点到像素的转换，我们得出了其像素密度约为270ppi的结论。

简而言之，这个水平低于iPhone（此处指iPhone 6的326ppi），但是还是高密度。并且它也是好的，考虑到没有反光镜也就没有光学取景器。

机身左侧配备了大量的接口——一个HDMI micro接口，3.5mm耳机/麦克风接口和一个micro-USB接口。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.