Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

iPhone 1st Generation Battery Replacement

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 2 vertalen

Stap 2

iPhone 1st Generation Battery Replacement: stap 0, afbeelding 1 van 1

Working from the edge opposite the battery connectors, insert a spudger between the battery and the plastic frame and pry up. The battery is attached to the casing with an adhesive, but should slowly come free.
If the battery isn't coming free, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery.
Wait about one minute for the alcohol solution to weaken the adhesive.
Use the flat end of a spudger to gently lift the battery.
Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before continuing.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.