Ga door naar hoofdinhoud

Reemplazo de la tapa trasera del Samsung S6

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 25 handleidingen die deze stap bevatten.

Stap 3
Samsung Galaxy S6 Rear Glass Replacement: stap 0, afbeelding 1 van 2 Samsung Galaxy S6 Rear Glass Replacement: stap 0, afbeelding 2 van 2
  • Slide the pick along the bottom edge of the phone to slice through the adhesive securing the rear glass.

  • Afterward, it may help to leave the pick in place and grab a second pick as you proceed to the next step. Leaving the pick inserted can help prevent the glue you just separated from re-adhering.

  • Re-heat the rear glass as needed to prevent the glue from cooling and hardening.

Desliza la púa de apertura a lo largo del borde del teléfono separando el adhesivo que sujeta el cristal trasero.

Luego, podría ayudar dejar la púa en su lugar y toma una segunda púa mientras procedes con el paso siguiente. Al dejar la púa insertada podría ayudar a prevenir que el pegamento que separes se vuelva a adherir.

Vuelve a calentar el cristal trasero cuando sea necesario para prevenir que el pegamento se enfría y endurezca.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.