Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 5 vertalen
Stap 5
-
Place the camera backward so that the lens is facing up.
-
Disconnect the ribbon at the bottom of the main board by flipping up the brown ZIF connector and sliding the ribbon out.
-
Remove the right most square connector at the bottom of the camera by flipping up the connector with two fingers until it detaches.
-
Locate and remove the white rubber cover on the microphone.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.