Ga door naar hoofdinhoud

닌텐도 DSi 하단 케이스 어셈블리 교체하기

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Stap 4 vertalen

Stap 4
Nintendo DSi Lower Case Assembly Replacement: stap 0, afbeelding 1 van 2 Nintendo DSi Lower Case Assembly Replacement: stap 0, afbeelding 2 van 2
  • Carefully lift the lower casing from its bottom edge.

  • The lower case is still attached to the motherboard by the volume and SD board cable highlighted in red. Do not try to completely remove the lower case of the DSi yet.

  • Pry the volume and SD board cable up from its socket on the motherboard using a spudger.

  • Once the cable is completely removed, then you may take off the entire outer casing.

하단 가장자리에서 하단 케이스를 조심히 들어 올리세요.

빨간색으로 강조 표시된 볼륨 및 SD 보드 케이블로 하단 케이스가 여전히 마더보드에 부착되어 있습니다. 아직 DSi의 하단 케이스를 완전히 분리하지 마세요.

스퍼더를 사용하여 볼륨 및 SD 보드 케이블을 마더보드의 소켓에서 위로 들어 올리세요.

케이블이 완전히 분리되면 외부 케이스 전체를 분리할 수 있습니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.